
Mahogany
Braised short rib, hot through the course
The plate holds about 80°C for two hours on an H1X, with no burner on the table.
HOME / BUFFETWARE / TABLETOPS
Buffetware · Tabletops · S28 · S24 · S20 · T40S28, S24, S20, T40. Heat, or cold, at the table.
Tabletops are the single‑dish sets for the dining table, the counter or the cabana, built around the same 20 × 20 cm element. S28 is the hot‑and‑cold set with a porcelain plate and a clear acrylic lid; S24 is the Instant Hot steamer that runs on a T30 pack; S20 and T40 are the deco bases, handcrafted acacia or melamine frames for one or two H1X hot cells.
At the table the element is the whole story: a soup that stays hot through the meal without a burner, a dessert plate that stays cold in a warm dining room, a sharing dish that does not need a flame under it in front of children.










Buffet lines, GN 1/1 and 1/2.

Hot or cold at the table.

Solid acacia or melamine under one hot dish.

Two H1X side by side for a long dish.

Cells travel frozen or charged to the venue.




The S28 and S24 frames are MoodShells too, in any shade of the 2027 collection or your own.
The S28 runs hot with an H1X or cold with a C1 Pro. The S24 steams with a T30 pack.

Mahogany
The plate holds about 80°C for two hours on an H1X, with no burner on the table.

Deep Lagoon
Cabanas and terraces with no socket: nothing to plug in, nothing to light.

Umber
Cooked in the kitchen, then held hot on an H1X at the table, with no flame in front of the guest.

Damson
The plate holds about −4°C for four hours on a C1 Pro, with no melt water on the table.

Champagne
Chocolate, cream and fruit stay cold through the speeches.

Eucalyptus
Cold plates at the pool bar, with no ice bucket to refill.

Jade
Steam from a T30 pack keeps the pancakes hot and moist in a bamboo basket, for about 45 minutes.

Sandstone
The bamboo baskets sit on the steam vent and stay hot at the table, with no burner and no cable.

Cloud
Oshibori stay hot and damp on the steam, with no towel warmer and no water line.
Scenes are mock-ups of the S28 and S24 tabletop sets; brand names are invented examples of your logo printed on the side of the MoodShell. Custom colours from 50 pieces per colour, per size.
H1X for a hot dish, C1 Pro for a cold one, T30 Heat Blaster where there is no charging.
The element sits in the set's well; in a deco base the H1X sits inside the frame.
The set's own dish, a pot, or a board.
Nothing to light, nothing to plug in, nothing to spill.
| Models | S28 hot & cold · S24 instant hot · S20 & T40 deco bases |
|---|---|
| S28 dimensions | 31 × 31 × 15 cm · 1.70 kg |
| S28 components | 33010C001 S288L acrylic lid · 33020C002 S281P porcelain plate · 33070C002 S28B thermal base |
| S28 frame | Melamine MoodShell · white, black or any MoodShell colour · logo on the side |
| S24 frame | Melamine MoodShell · black or any MoodShell colour · logo on the side |
| S24 dimensions | 24 × 24 × 7 cm · 1.60 kg |
| S24 Instant Hot Tabletop | 3800SETC003 · 304 stainless steamer, thermal base tray, melamine frame, dishwasher friendly |
| S20 dimensions | 22.2 × 22.2 × 6.0 cm |
| T40 dimensions | 42.3 × 22.2 × 6.0 cm |
| Compatible elements | S28: H1X · C1 Pro · Heat Blaster Insert with T30 · S24: T30 only · S20 and T40: H1X only |
| Plate surface, S28 | About 80°C 2 hrs (H1X high) · 60°C 3 hrs (H1X low) · 80°C 30 min (Heat Blaster) · −4°C 4 hrs (C1 Pro) |
| Element well | 20 × 20 cm; 5 cm element depth |
| Warranty | 1 year on factory functions |
On the S28 the plate surface holds about 80°C for two hours with an H1X on high, about 60°C for three hours on low, about 80°C for thirty minutes with a Heat Blaster, and about −4°C for four hours with a C1 Pro. The S24 steamer brings a pot to about 80°C within a minute of adding water and keeps it hot for about 45 minutes.
A small dish loses heat faster than a large pan, so the lid earns its place on the S28. For desserts on a C1 Pro the reverse applies: a small cold plate in a warm room stays colder for longer than a wide tray would.
S28 and S24 are dishwasher friendly. Acacia deco bases are wiped with a damp cloth and kept out of the dishwasher; melamine deco bases are dishwasher friendly. Warranty is one year on factory functions.
A tabletop burner costs fuel every sitting and puts a flame within reach of a sleeve. An S28 with an H1X costs a recharge, and the same set runs cold for dessert with a C1 Pro.
For hot towels, soup and dessert service the sets replace plumbing, burners and ice buckets with one element and one frame.
Read more: Hot towels with no plumbing · Who pays when a guest is burned

Cooked in the kitchen, then held hot on an H1X under the pot; no burner in front of the guest.

C1 Pro under an S28 keeps chocolate, cream and fruit cold through the course.

A dish that arrives hot and stays hot, with nothing to plug in.

Oshibori service from an S24 steamer without a towel warmer or a water line.

Cold plates on a C1 Pro in full sun; hot snacks on an H1X with no cable to the bar.

A single hot item on an S20 deco base; a chilled one on an S28.

A T40 acacia deco base under a Sunday lasagne; an S28 keeping a winter soup hot through dinner.
Not the right tool for
Tell us your territory, your volume and the set you are building, and we will talk business. Samples go to qualified trade partners and are paid in advance.
Yes, the S28. With an H1X the plate holds about 80°C for two hours on high or 60°C for three hours on low; with a C1 Pro it holds about −4°C for four hours, with no ice and no melt water. The S24 runs hot on a T30 steam pack, and the S20 and T40 deco bases are hot only.
Yes. The S28 and S24 frames are MoodShells: white, black, any of the nine shades in the 2027 collection or your own brand colour, from 50 pieces per colour, per size. Your logo is printed on the side of the melamine frame, and you approve a colour proof before production.
Change the MoodShell, not the set. Lift the plate and the cell out and set them into the next shell by hand, with no tools. The H1X, the C1 Pro and the plates carry over.